🎵 TikTok 53.1K followers ⭐ Google 5.0 · 2,300+ reviews 📍 Serving all of Singapore ✅ BizSafe Level 3 Certified ⚡ Same-day appointments available 📺 As featured in CNA Insider · 8days · AsiaOne · Mothership · STOMP 🇦🇱→🇸🇬 Singapore's Ang Mo Aircon Guy 🎵 TikTok 53.1K followers ⭐ Google 5.0 · 2,300+ reviews 📍 Serving all of Singapore ✅ BizSafe Level 3 Certified

Why Is Your Aircon Not Turning On?

Why Is Your Aircon Not Turning On

If your aircon is not turning on, the cause is usually simpler than it looks. Most no-power calls we attend in Singapore come down to a handful of things, and several of them you can check yourself in five minutes. So work through the list below in order, cheapest and safest first, before you book anyone.

Common Reasons Your Aircon Is Not Turning On

An aircon that will not start at all is different from one that starts but does not cool. When nothing happens, no beep, no light, no louvre movement, the problem sits in the power supply, the remote, or the control electronics. On the other hand, if the unit lights up, beeps and then stops, it is usually a protection cut-out responding to a fault.

Technician testing the power supply on an aircon not turning on in a Singapore home

1. The Isolator Switch or Circuit Breaker Is Off

First, check the isolator switch for the aircon. In most HDB flats and condos it sits on the wall near the indoor unit or beside the outdoor condenser, and it is easy to switch off by accident during cleaning. Next, open your distribution board and look for a tripped breaker or RCCB.

If the breaker trips again as soon as you reset it, stop there. Repeated tripping points to an electrical fault, so do not keep forcing it back on. Our guide on why your aircon keeps tripping the circuit breaker covers the usual causes. In addition, the Energy Market Authority advises that frequent trips should be checked by a licensed electrical worker, as set out in its electrical safety guidance.

2. The Remote Control or Its Settings

Next, rule out the remote. Weak batteries are the most common culprit, so swap in a fresh pair. You can also point the remote at your phone camera and press a button: if you see a faint flash on screen, the remote is sending a signal.

Also check that a timer or sleep mode is not holding the unit off. If the remote still does nothing, most indoor units have a small manual or emergency button under the front panel. If the aircon starts from that button, the remote is the problem rather than the aircon.

3. A Safety Cut-Out After a Fault

Sometimes the aircon does turn on, but it shuts itself down within seconds or minutes. That is a protection feature, not a dead unit. For example, many systems wait about three minutes before restarting the compressor after a power cut, which is normal.

However, if a light starts blinking or a code appears, the unit is telling you what is wrong. Our guide to an aircon light blinking but not working explains what the patterns mean, and you can look up your brand in our aircon troubleshooting guide. Ceiling cassette units also have a float switch that stops the system when the drain tray is full, so a blocked drain can look like a power fault.

4. A Faulty PCB, Capacitor or Fan Motor

If the power supply and remote both check out, the fault is usually inside the unit. The control board (PCB) can fail after a power surge, a lightning strike or water getting into the electronics. Similarly, a failing fan motor can stop the system from starting.

On older non-inverter units, a weak capacitor is another common cause; we explain where the aircon capacitor is located and why it matters. Inverter units work differently, so a capacitor swap is rarely the fix there. Either way, these parts need a technician with proper test equipment, because guessing usually means paying for parts you did not need.

5. Low Gas Is Usually a Cooling Problem, Not a Power Problem

Low refrigerant rarely stops an aircon from turning on. Instead, the unit runs but blows warm or weak air, and eventually a protection code may stop the compressor. If that sounds like your situation, read when your aircon needs a gas top-up. A leak should be found before anyone tops up, otherwise the gas simply escapes again.

What to Check Before You Call a Technician

Before you book a visit, run through this quick checklist:

  • Isolator switch on, and no tripped breaker or RCCB at the distribution board
  • Fresh batteries in the remote, and no timer or sleep mode set
  • Unit tested with the manual button under the front panel
  • Any blinking light or error code noted, ideally with a photo
  • Filters clean, so you can rule out airflow problems once it runs

If everything checks out and your aircon is still not turning on, the fault is internal and it is time for a proper diagnosis.

Still Not Turning On? Get It Checked Properly

An aircon that will not turn on can be anything from flat batteries to a failed board, so a clear diagnosis saves you money. Our technicians test the power supply, control board, motor and safety switches, and explain the fault before any work starts. Book a visit through our aircon repair service, or contact us and WhatsApp a photo of the unit and any error code to +65 8818 5781.

EXPLORE MORE